Transmission towers are structures that support overhead power lyne, also known as transmission lines, used to transmit electrical energy over long distances. There are several types of transmission towers, each designed to cater to specific needs and requirements. Some common types include:
buisvormige kommunikasietoring: Lattice towers are the most common type of transmissie toring. They consist of a steel framework of multiple steel bars connected together, forming a lattice-like structure. These towers are cost-effective and have a relatively lower visual impact compared to other types.
Tubular Steel Pole Tower: These towers consist of a single, tapered steel pole or multiple steel tubes joined together. The steel poles are hollow, making them lighter and more economical than solid poles. They are often used in urban areas due to their sleek appearance and lesser right-of-way requirements.
monopool toring: Monopole towers are single, vertical steel poles with a smaller footprint compared to lattice towers. They are often used in urban and suburban environments where aesthetic concerns and land availability are important factors.
Geankerde toring: Guyed towers consist of a single vertical mast supported by a system of guy wires, which are anchored to the ground or other structures. They are lightweight and cost-effective but require a larger area for installation due to the tensioned guy wires.
Suspension Tower: Suspension towers are used to support the conductors (power lines) in a horizontal or slightly inclined position. They are designed to allow the conductors to swing freely in the direction of the line, which helps accommodate the natural movement of the conductors due to wind, temperatuur, and other factors.
spanning toring: Tension towers, also known as angle or strain towers, are used where the transmission line changes direction or elevation. These towers are designed to withstand higher mechanical loads compared to suspension towers.
Dead-end Tower: Dead-end towers, also known as anchor or termination towers, are used at the end of a transmission line or at points where the line needs to be anchored to prevent excessive movement. These towers are designed to withstand high mechanical loads as they support the entire tension of the transmission line.