Microwave Communication Towers, Angle steel tower

overhead double circuit 200KV transmission line tower
August 18, 2018
Portable steel tower series
August 31, 2018

Microwave Communication Towers, Angle steel tower

Microwave Communication Towers, Angle steel tower

Microwave Communication Towers, Angle steel tower
Height5-200M
Wind Speed

30M/S(Different In Different Regions)

 

 

Main MaterialAngle Steel
Ice Coating5mm—7mm(Different In Different Regions)
Earthquake Intensity
Optimal Temperature-35°C To 45°C
Vertical Deviation<1/1000
Delivery Time30 Days after receiving 30% Deposit
Preservative TreatmentHot Dipped Galvanized For All Tower Steel Members, Guarantee Against Rusting For 50 Years
Main FunctionSupporting For Signal Transmission, Bracing for The Signal Transmitting Antenna
Carried StandardThe Steel Materials, Hot Dip Galvanization, Bolts Standard Is Conforming To The Relevant Chinese National Standards and Equivalent as ASTM Standards, BSEN Standards, or ISO Standards
Brief FeaturesMicrowave Communication Towers are usually built on the ground, roof, summit, strong bearing capacity of the wind. Angle Steel are main material used in tower structures, including some steel plate. The structures can be also composed by steel tube only. Each section of the tower frame shall be connected by bolts. All tower structure shall be hot dipped galvanized after fabrication. Angle Steel Tower shall be composed by tower boots, tower body, lightning rod, platform, climbing ladder, antennas brackets, feeder panel and lightning deflectors

 

 Features of Microwave Communication Towers, Angle steel tower:

 1.Small coefficient of wind load, strong wind resistance.

2.Save land resource, convenient location.

3.Convenient transportation and installation.

Leave a Reply

Your email address will not be published. Required fields are marked *