How to build the foundation of communication tower

communication tower structure
February 5, 2018
Welding Design Principle Of Steel Tower
February 5, 2018

How to build the foundation of communication tower

In the selected telecommunications tower construction address, if you want to establish a high quality, good security of the communications tower, you must use the independent foundation of reinforced concrete, flat raft foundation and pile foundation; and should also be two Mainly based on the kind of natural ground to hold power layer, thus saving the cost of the entire communication tower.
The independent foundation made of reinforced concrete belongs to the shallow foundation. It is necessary to ensure that the foundation has good bearing capacity, and the geotechnical proportionality should be ensured. Therefore, it is more economical to construct the communication tower in this way, Foundation, with 2 to 3 layers of clayey silty soil as the holding layer, the bearing capacity of the foundation value of 120kPa, the relief of the base 3.0 m, depth of 2.6 m, the base plate count by the anti-pull control, the base of the investment about 80000 yuan.
To accept the independent foundation, it is necessary to use 2 to 1 layers of sandy silt as the holding layer. The bearing capacity characteristic value of the foundation should be 130 kPa, the width of the foundation is 3.0 m and the depth of the ground is 2.5 m. .
Want to build a communication tower, the foundation is very important, the foundation is relatively stable case, it will make the communication tower also has good stability, making the construction of communication tower higher quality and more secure.

Leave a Reply

Your email address will not be published. Required fields are marked *