Technical News

November 18, 2018

monopole tower type and design span

Monopoles shall have the general arrangements and configurations shown in the drawings included with the attachment. They shall be designed to resist the specified ultimate system […]
January 5, 2019

necessary parts of Radio masts and towers,communication towers

Steel Work The steel used in the fabrication of the tower shall comply with BS, JIS or an equivalentstandard proposed by TowerSupplier and agreed by “*****”. […]
April 6, 2018
10kv -220kv double circuit transmission line galvenized angle steel tower

Power Transmission Angle Steel Tower Assembly Material

Assembly Material All necessary bolts, screws, rivets, nuts, washers and locking devices are to be furnished as assembly material for the equipment. All bolts and screwed […]
April 15, 2018
35KV-500KV High voltage Power transmission line Angular steel tower 10-40M

Power transmission line steel tower Inspection and Tests, Packing,Transportation

Inspection and Tests            a) General The Contractor shall make adequate tests and inspections to determine whether the material furnished is strictly […]
May 2, 2018
galvanized steel telecommunication tower

Self-supporting Communication Tower Design Standards & Mechanical properties

Tower Design STANDARDS & CODES Design of the towers shall comply with British Standard (BS) 5950. These shall cover the following: Self-supporting Communication Tower Foundation Foundation […]
April 26, 2018
Structural Steel Mobile Communication Tower

Steel Structural Tower Fabrication and Welding

Steel Structural Tower Fabrication and Welding The success of any major building modification is highly dependent upon successful welding techniques. In fact, rivet construction is largely […]
December 27, 2018
Structural Steel Mobile Communication Tower

STEEL TOWER DESIGN WIND SPEED AND DEFLECTION CRITERIA

Standard: ANSI/TIA-222-H-1 -2018 Design Wind Speed: V = 160 km/hr. (3 Sec Gust) Operational Wind Speed: V = 160 km/hr. (3 Sec Gust) Maximum Tilt & […]
April 16, 2018
Steel structure tower

The application and the history of steel

Steel is both the most widely used and most recycled metal material on earth. From stainless and high-temperature steels to flat carbon products, steel in its […]
February 20, 2018

The dimensions and technical requirements of the Tower

The dimensions and technical requirements of the Tower First, the generation of the work of the content: Party B is responsible for the daily cycle patrol […]
August 1, 2018

transmission steel tower : supporting unit of overhead transmission line

What is the overhead transmission line? The overhead transmission line is realized by boosting the electric energy generated by the generator with a transformer, and then […]
July 27, 2018
double-circuit transmission line tower

Transmission Steel Tower shape,Power tower shape classification

Transmission towers support the high-voltage conductors of overhead power lines, from the generating station switchyard right up to the source substations and satellite substations located near […]
February 5, 2018

Welding Design Principle Of Steel Tower

Overhead transmission line through the wire with insulators and gold set on the tower above, so that the wire to the ground and buildings to maintain […]