Monopoles are an ideal solution where space is a premium and aesthetics are a must. A simple, sleek design, Rohn’s pre-engineered monopoles, exclusively available through Jielian, […]
Abstract: With the continuous improvement of social and economic development level, China’s power grid construction has also been continuously developed and advanced. Transmission towers are an […]
Electrical Tower Accessories a) General Each tower shall be provided with the necessary pull-off plates, U-bolts, strain links, etc., at all conductor and shield wires attachment […]
Assembly Material All necessary bolts, screws, rivets, nuts, washers and locking devices are to be furnished as assembly material for the equipment. All bolts and screwed […]
Shop Detailing and Estimation Before leaving the Manufacturer’s Works all tower members shall be hard stamped with distinguishing numbers and/or letters corresponding to distinguishing numbers and/or […]
B1.5.1 Design Loads Applied basic wind pressures shall be in accordance with those specified in B2.5.8 above. The design shall be based on the following considerations:- […]
B1.5.3 Sizing of Tower Members Member and member connection design sizing shall be performed in accordance with the latest issue of Guide for Design of […]
B1.5.1 Design Requirements The unit stresses in members and connections for the structural design calculation, based on the design loading and design unbalanced loading (broken wire […]
B1.5.6 Types of Towers a) Tower structures shall be of the self-supporting lattice type steel frame with square bases. The general outlines of the towers, the […]
Transmission line Steel Tower Galvanizing Requirements Except where specified to the contrary, all iron and steel used in the construction of the Contract Works shall be […]
INTRODUCTION The works covered by these Technical Specifications form part of the Interconnection System Reinforcement Project. This part of the project consists of the design, manufacture, […]