Profile & Plate
Project 230KV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
Sample no. & result | |||||
410 | 450 | 220 | 223 | 130 | ||||
125 *14 |
125 *14 |
125 *10 |
125 *10 |
100 *8 | ||||
Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.22 /+0.36 | +0.36 /+0.18 | +0.36 /-0.22 | +0.22 /-0.22 | +0.32 /-0.22 | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / | / | / | / | |
Length or width | 2.0 |
Steel measure tap | +1.0 | +2.0 | +1.0 | +2.0 | +1.0 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 2.0 | 3.0 | 2.0 | 2.0 | 2.0 | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | |
Corner cut distance | 1.5 |
Callipers | / | / | / | / | 0.64 | |
Profile terminal distance | 1.5 |
Callipers | +0.26 | +0.20 | +0.20 | +0.24 | +0.24 | |
Profile stadia | 1.0 |
Callipers | -0.32 | +0.30 | +0.34 | -0.26 | +0.32 | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.46 | +0.48 | +0.42 | +0.46 | +0.42 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0 | 0 | 0 | 0 | 0 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | 0 | 0 | |
Roundness of the hole | 1.2 |
Callipers | 0.14 | 0.10 | 0.08 | 0.12 | 0.10 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | +0.22 | +0.24 | +0.18 | +0.22 | +0.20 | |
Random two holes distance in same group | 1.0 |
Callipers | +0.32 | +0.40 | +0.38 | +0.40 | +0.24 | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.32 | +0.42 | +0.44 | +0.34 | +0.26 | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | +1.0 | +1.0 | +1.0 | +1.0 | +1.0 | |
Bending point displacement | 2.0 | Steel measure tap | / | / | / | / | / | |
Root clean | t10 | +0.8 -0.4 |
Callipers | / | / | / | / | / |
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified Qualified | Qualified Qualified | Qualified Qualified | Qualified Qualified | Qualified Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
Sample no. & result | |||||
12 | 13 | 15 | 131 | 9 | ||||
100*7 | 100*7 | 75*5 | 100*8 | 75*7 | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.32 /+0.24 | +0.26 /+0.32 | +0.46 /-0.12 | +0.22 /-0.24 | +0.42 /-0.24 | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / | / | / | / | |
LB Length or width | 2.0 |
Steel measure tap | +1.0 | +1.0 | +1.0 | +1.0 | -2.0 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 1.5 | 0.5 | 1.0 | 1.5 | 1.0 | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 0.5 | 0.5 | 0.5 | 0.5 | 0 | |
Corner cut distance | 1.5 |
Callipers | +0.44 | +0.36 | +0.52 | +0.34 | +0.44 | |
Profile terminal distance | 1.5 |
Callipers | +0.62 | +0.42 | +0.54 | +1.02 | +0.28 | |
Profile stadia | 1.0 |
Callipers | -0.46 | -0.62 | +0.22 | +0.28 | -0.42 | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.34 | +0.32 | +0.22 | +0.42 | +0.24 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.24 | 0.22 | 0.34 | 0.36 | 0.30 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | 0 | 0 | |
Roundness of the hole | 1.2 |
Callipers | 0.14 | 0.14 | 0.12 | 0.16 | 0.10 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | +0.22 | +0.26 | -0.30 | +0.32 | -0.24 | |
Random two holes distance in same group | 1.0 |
Callipers | +0.42 | +0.36 | +0.42 | +0.44 | +0.36 | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.40 | +0.58 | -0.30 | -0.50 | +0.52 | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | -0.5 | -1.0 | -1.0 | +1.0 | +1.0 | |
Bending point displacement | 2.0 | Steel measure tap | / | / | / | / | / | |
Root clean | t10 | +0.8 -0.4 | / | / | / | / | / |
|
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
Sample no. & result | |||||
7 | 8 | 3 |
| |||||
75*7 |
75*7 |
70*5 |
|
| ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.52 /+0.56 | +0.56 /+0.52 | +0.56 /-0.42 |
|
| |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / | / |
|
| |
LB Length or width | 2.0 |
Steel measure tap | +1.0 | +2.0 | +1.0 |
|
| |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 2.0 | 2.0 | 2.0 |
|
| |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 2.0 | 1.0 | 2.0 |
|
| |
Corner cut distance | 1.5 |
Callipers | / | / | / |
|
| |
Profile terminal distance | 1.5 |
Callipers | +0.18 | -0.20 | -0.22 |
|
| |
Profile stadia | 1.0 |
Callipers | -0.30 | +0.28 | +0.26 |
|
| |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.50 | +0.48 | +0.48 |
|
| |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0 | 0 | 0 |
|
| |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 |
|
| |
Roundness of the hole | 1.2 |
Callipers | 0.10 | 0.10 | 0.12 |
|
| |
Adjacent two holes distance in same group | 0.5 |
Callipers | +0.20 | +0.18 | +0.22 |
|
| |
Random two holes distance in same group | 1.0 |
Callipers | +0.46 | +0.42 | +0.44 |
|
| |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.52 | +0.50 | +0.56 |
|
| |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | +1.0 | +1.0 | +1.0 |
|
| |
Bending point displacement | 2.0 | Steel measure tap | / | / | / |
|
| |
Root clean | t10 | +0.8 -0.4 |
Callipers | / | / | / |
|
|
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / |
|
| |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / |
|
| |
Conclusion | Qualified | Qualified | Qualified |
|
|
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
282 | 224 | 224A | 136 | 137 | ||||
125*14 | 125*10 | 125*10 | 100*8 | 100*8 | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.24 /-0.26 | +0.42 /+0.22 | +0.28 /-0.32 | +0.32 /-0.28 | +0.22 /-0.26 | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / | / | / | / | |
LB Length or width | 2.0 |
Steel measure tap | +1.0 | +1.0 | +2.0 | +1.0 | +2.0 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 2.0 | 2.0 | 1.0 | 2.0 | 1.0 | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 0.5 | 0 | 0.5 | 0.5 | 0 | |
Corner cut distance | 1.5 |
Callipers | / | / | / | / | / | |
Profile terminal distance | 1.5 |
Callipers | -0.20 | +0.22 | -0.20 | +0.24 | +0.22 | |
Profile stadia | 1.0 |
Callipers | -0.30 | +0.32 | +0.20 | +0.26 | +0.28 | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.50 | +0.52 | +0.48 | +0.46 | +0.42 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.26 | 0.30 | 0.22 | 0.24 | 0.20 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | 0 | 0 | |
Roundness of the hole | 1.2 |
Callipers | 0.10 | 0 | 0.12 | 0.16 | 0.06 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | +0.20 | +0.22 | +0.20 | +0.18 | +0.24 | |
Random two holes distance in same group | 1.0 |
Callipers | +0.42 | +0.40 | +0.38 | +0.46 | +0.40 | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.48 | +0.50 | +0.48 | +0.46 | +0.52 | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | +1.0 | +1.0 | +1.0 | +1.0 | +1.0 | |
Bending point displacement | 2.0 | Steel measure tap | / | / | / | / | / | |
Root clean | t10 | +0.8 -0.4 |
Callipers | / | / | / | / | / |
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
| Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
14 | 11 | 292 |
| |||||
75*6 | 75*6 | 75*6 |
|
| ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.26/0 | +0.18/ +0.36 | +0.26/ +0.16 |
|
| |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / | / |
|
| |
LB Length or width | 2.0 |
Steel measure tap | +1.0 | +2.0 | +1.0 |
|
| |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 2.0 | 2.0 | 2.0 |
|
| |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 1.0 | 1.0 | 1.0 |
|
| |
Corner cut distance | 1.5 |
Callipers | / | / | / |
|
| |
Profile terminal distance | 1.5 |
Callipers | +0.14 | +0.18 | +0.18 |
|
| |
Profile stadia | 1.0 |
Callipers | +.30 | -0.30 | +0.26 |
|
| |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.40 | +0.42 | +0.40 |
|
| |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.36 | 0.34 | 0.36 |
|
| |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 |
|
| |
Roundness of the hole | 1.2 |
Callipers | 0.28 | 0.12 | 0.14 |
|
| |
Adjacent two holes distance in same group | 0.5 |
Callipers | +0.20 | +0.20 | +0.20 |
|
| |
Random two holes distance in same group | 1.0 |
Callipers | +0.46 | +0.48 | +0.44 |
|
| |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.40 | +0.46 | +0.44 |
|
| |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | +1.0 | +1.0 | +1.0 |
|
| |
Bending point displacement | 2.0 | Steel measure tap | / | / | / |
|
| |
Root clean | t10 | +0.8 -0.4 |
Callipers | / | / | / |
|
|
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / |
|
| |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / |
|
| |
Conclusion | Qualified | Qualified | Qualified |
|
|
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method | 21 | 22 | 180 | 184 | 229 | |
75*5 | 75*5 | 75*5 | 75*5 | 75*5 | ||||
+0.22/+0.12 | +0.22/ +0.34 | +0.24/ +0.26 | +0.28/+0.22 | +0.22/+0.24 | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | / | / | / | / | / | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | +1.0 | +1.0 | +2.0 | +2.0 | +1.0 | |
LB Length or width | 2.0 |
Steel measure tap | 1.0 | 1.0 | 2.0 | 2.0 | 1.0 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 0.2 | 0.5 | 0.5 | 0.4 | 0.2 | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | +0.52 | / | / | / | / | |
Corner cut distance | 1.5 |
Callipers | +0.20 | -0.26 | -0.24 | +0.22 | -0.22 | |
Profile terminal distance | 1.5 |
Callipers | -0.30 | +0.32 | +0.30 | -0.32 | -0.28 | |
Profile stadia | 1.0 |
Callipers | +0.40 | +0.42 | +0.48 | +0.42 | +0.40 | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | 0.30 | 0.26 | 0.22 | 0.26 | 0.24 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0 | 0 | 0 | 0 | 0 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0.06 | 0.08 | 0.12 | 0.10 | 0.06 | |
Roundness of the hole | 1.2 |
Callipers | +0.22 | +0.24 | +0.22 | +0.18 | +0.26 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | +0.42 | +0.40 | +0.36 | +0.38 | +0.42 | |
Random two holes distance in same group | 1.0 |
Callipers | +0.48 | +0.42 | +0.52 | +0.58 | +0.60 | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.5 | +1.0 | +1.0 | +1.0 | +1.0 | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | / | / | / | / | / | |
Root clean | t10 | +0.8 -0.4 |
Callipers | / | / | / | / | / |
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
1 | 18 | 472 | 553 | 73 | ||||
50*5 | 50*5 | 50*5 | 50*5 | 45*5 | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.42/+0.22 | +0.26/ +0.24 | +0.26/ +0.22 | +0.24/+0.26 | +0.28/+0.32 | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / | / | / | / | |
LB Length or width | 2.0 |
Steel measure tap | +1.0 | -1.0 | +1.0 | -1.0 | -2.0 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 0.5 | 0.2 | 0.4 | 0.5 | 0.5 | |
Corner cut distance | 1.5 |
Callipers | +0.52 | +0.48 | / | / | +0.60 | |
Profile terminal distance | 1.5 |
Callipers | -0.24 | -0.20 | -0.26 | -0.20 | -0.20 | |
Profile stadia | 1.0 |
Callipers | +0.26 | +0.24 | +0.28 | +0.38 | +0.32 | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.46 | +0.44 | +0.42 | +0.46 | +0.42 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.26 | 0.24 | 0.28 | 0.30 | 0.30 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | 0 | 0 | |
Roundness of the hole | 1.2 |
Callipers | 0.10 | 0.10 | 0.06 | 0.04 | 0.12 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | +0.20 | +0.26 | +0.24 | / | +0.18 | |
Random two holes distance in same group | 1.0 |
Callipers | +0.10 | +0.26 | / | / | +0.16 | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.48 | +0.42 | +0.50 | +0.52 | +0.60 | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | +1.0 | +1.0 | / | / | +1.0 | |
Bending point displacement | 2.0 | Steel measure tap | / | / | / | / | / | |
Root clean | t10 | +0.8 -0.4 |
Callipers | / | / | / | / | / |
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
151 | 243 | 475 | 25 | 92 | ||||
45*5 | 45*5 | 45*5 | 45*3 | 45*3 | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.32/+0.44 | +0.28/ +0.28 | +0.36/ +0.24 | +0.28/+0.52 | +0.48/ +0.46 | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / | / | / | / | |
LB Length or width | 2.0 |
Steel measure tap | +1.0 | +2.0 | +1.0 | +1.0 | +1.0 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | |
Corner cut distance | 1.5 |
Callipers | / | +0.42 | / | +0.46 | +0.44 | |
Profile terminal distance | 1.5 |
Callipers | +0.28 | +0.22 | +0.20 | +0.26 | +0.24 | |
Profile stadia | 1.0 |
Callipers | +0.28 | -0.26 | +0.22 | +0.20 | +0.24 | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.46 | +0.42 | +0.40 | +0.42 | +0.46 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.26 | 0.36 | 0.28 | 0.32 | 0.36 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | 0 | 0 | |
Roundness of the hole | 1.2 |
Callipers | 0.10 | 0.10 | 0.12 | 0.12 | 0.14 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | / | +0.20 | / | +0.18 | / | |
Random two holes distance in same group | 1.0 |
Callipers | / | / | / | / | / | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.52 | +0.50 | +0.50 | +0.48 | +0.50 | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | / | / | / | / | / | |
Bending point displacement | 2.0 | Steel measure tap | / | / | / | / | / | |
Root clean | t10 | +0.8 -0.4 |
Callipers | / | / | / | / | / |
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project 230KV Bolivia Tower
Type2HD
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
101 | 107 | 145 | 150 | 191 | ||||
45*3 | 45*3 | 45*3 | 45*3 | 45*3 | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.46/+0.26 | +0.34/+0.12 | +0.28/-0.24 | +0.38/-0.32 | +0.22/-0.32 | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / | / | / | / | |
LB Length or width | 2.0 |
Steel measure tap | +1.0 | +1.5 | +1.5 | +1.0 | -1.0 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 1.0 | 0.5 | 1.5 | 1.0 | 1.0 | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | +1.0 | +1.0 | +0.5 | +0.5 | +1.0 | |
Corner cut distance | 1.5 |
Callipers | / | / | / | / | / | |
Profile terminal distance | 1.5 |
Callipers | +0.42 | +0.64 | +0.38 | +1.32 | +0.24 | |
Profile stadia | 1.0 |
Callipers | -0.52 | -0.66 | +0.42 | +0.28 | -0.22 | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.46 | +0.36 | +0.24 | +0.32 | +0.26 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.26 | 0.28 | 0.14 | 0.32 | 0.16 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | 0 | 0 | |
Roundness of the hole | 1.2 |
Callipers | 0.28 | 0.14 | 0.16 | 0.26 | 0.22 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | / | / | / | / | / | |
Random two holes distance in same group | 1.0 |
Callipers | / | / | / | / | / | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.42 | +0.58 | -0.32 | -0.50 | +0.32 | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | / | / | / | / | / | |
Bending point displacement | 2.0 | Steel measure tap | / | / | / | / | / | |
Root clean | T 10 | +0.8 -0.4 | / | / | / | / | / |
|
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
94 | 98 | 103 | 104 | 235 | ||||
45*3 | 45*3 | 45*3 | 45*3 | 45*3 | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.36/+0.32 | +0.38/ +0.26 | +0.36/ +0.26 | +0.26/+0.24 | +0.28/+0.24 | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / | / | / | / | |
LB Length or width | 2.0 |
Steel measure tap | -1.5 | +1.0 | +1.0 | -1.5 | -0.5 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 1.0 | 1.0 | 1.0 | 0.5 | 0.5 | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 0 | +0.5 | +0.5 | +0.5 | +0.5 | |
Corner cut distance | 1.5 |
Callipers | +0.56 | / | / | +0.48 | / | |
Profile terminal distance | 1.5 |
Callipers | +0.86 | +0.56 | +0.48 | +1.04 | +0.54 | |
Profile stadia | 1.0 |
Callipers | -0.58 | -0.62 | +0.46 | +0.26 | -0.44 | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.28 | +0.36 | +0.34 | +0.28 | +0.18 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.22 | 0.22 | 0.12 | 0.22 | 0.14 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | 0 | 0 | |
Roundness of the hole | 1.2 |
Callipers | 0.32 | 0.28 | 0.28 | 0.22 | 0.24 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | / | / | / | / | / | |
Random two holes distance in same group | 1.0 |
Callipers | / | / | / | / | / | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.22 | +0.42 | +0.42 | +0.32 | +0.52 | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | / | / | / | / | / | |
Bending point displacement | 2.0 | Steel measure tap | / | / | / | / | / | |
Root clean | T 10 | +0.8 -0.4 | / | / | / | / | / |
|
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
266 | 295 | 303 | 456 | 461 | ||||
45*3 | 45*3 | 45*3 | 45*3 | 45*3 | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.36/+0.34 | +0.24/ +0.34 | +0.44 +0.24 | +0.26/+0.28 | +0.42/+0.24 | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / | / | / | / | |
LB Length or width | 2.0 |
Steel measure tap | +1.0 | +1.5 | +0.5 | -1.0 | -1.0 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | +0.5 | +0.5 | +0.5 | +0.5 | +0.5 | |
Corner cut distance | 1.5 |
Callipers | +0.46 | / | / | / | / | |
Profile terminal distance | 1.5 |
Callipers | -0.22 | +0.18 | -0.32 | -0.24 | -0.18 | |
Profile stadia | 1.0 |
Callipers | +0.32 | +0.36 | -0.34 | -0.34 | -0.34 | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.22 | +0.32 | +0.16 | +0.18 | +0.24 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.12 | 0.24 | 0.24 | 0.22 | 0.32 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | 0 | 0 | |
Roundness of the hole | 1.2 |
Callipers | 0.18 | 0.16 | 0.32 | 0.16 | 0.20 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | / | / | / | / | / | |
Random two holes distance in same group | 1.0 |
Callipers | / | / | / | / | / | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.46 | +0.42 | +0.26 | +0.42 | +0.32 | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | / | / | / | / | / | |
Bending point displacement | 2.0 | Steel measure tap | / | / | / | / | / | |
Root clean | T 10 | +0.8 -0.4 | / | / | / | / | / |
|
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
474 | 464 |
|
| |||||
45*3 | 45*3 |
|
|
| ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | +0.34/+0.16 | +0.32/+0.44 |
|
|
| |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | / | / |
|
|
| |
LB Length or width | 2.0 |
Steel measure tap | +1.5 | +1.0 |
|
|
| |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | 0.5 | 0.5 |
|
|
| |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | +0.5 | +0.5 |
|
|
| |
Corner cut distance | 1.5 |
Callipers | +0.28 | +0.44 |
|
|
| |
Profile terminal distance | 1.5 |
Callipers | +0.44 | +0.42 |
|
|
| |
Profile stadia | 1.0 |
Callipers | -0.46 | -0.32 |
|
|
| |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.48 | +0.42 |
|
|
| |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.14 | 0.20 |
|
|
| |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 |
|
|
| |
Roundness of the hole | 1.2 |
Callipers | 0.14 | 0.26 |
|
|
| |
Adjacent two holes distance in same group | 0.5 |
Callipers | / | / |
|
|
| |
Random two holes distance in same group | 1.0 |
Callipers | / | / |
|
|
| |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.22 | -0.42 |
|
|
| |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | / | / |
|
|
| |
Bending point displacement | 2.0 | Steel measure tap | / | / |
|
|
| |
Root clean | T 10 | +0.8 -0.4 | / | / | / |
|
|
|
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / |
|
|
| |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / |
|
|
| |
Conclusion | Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
InspectType2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
43 | 110 | 118 | 159 | 197 | ||||
-16 | -16 | -16 | -14 | -14 | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | / | / | / | / | / | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | -0.24 | -0.26 | -0.32 | -0.18 | -0.22 | |
LB Length or width | 2.0 |
Steel measure tap | +2.0 | +1.0 | +2.0 | +1.0 | +1.0 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | / | / | / | / | / | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | |
Corner cut distance | 1.5 |
Callipers | / | / | / | / | / | |
Profile terminal distance | 1.5 |
Callipers | / | / | / | / | / | |
Profile stadia | 1.0 |
Callipers | / | / | / | / | / | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.48 | +0.42 | +0.42 | +0.40 | +0.40 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.20 | 0.12 | 0.16 | 0.16 | 0.12 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | 0 | 0 | |
Roundness of the hole | 1.2 |
Callipers | 0.20 | 0.10 | 0.10 | 0.14 | 0.10 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | +0.18 | +0.20 | +0.18 | +0.18 | +0.22 | |
Random two holes distance in same group | 1.0 |
Callipers | +0.36 | +0.42 | +0.36 | +0.36 | +0.44 | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.46 | +0.44 | +0.48 | +0.40 | +0.42 | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | +0.52 | +0.42 | +0.58 | +0.54 | +0.54 | |
Bending point displacement | 2.0 | Steel measure tap | 2.0 | 1.0 | 2.0 | 1.0 | 0.5 | |
Root clean | t10 | +0.8 -0.4 |
Callipers | / | / | / | / | / |
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
35 | 158 | 33 | 119 | 41 | ||||
-10 | -10 | -6 | -6 | -6 | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | / | / | / | / | / | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | +0.26 | +0.24 | +0.22 | -0.18 | +0.24 | |
LB Length or width | 2.0 |
Steel measure tap | +1.0 | +1.0 | +2.0 | +1.0 | +2.0 | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | / | / | / | / | / | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 0.5 | 0 | 0.5 | 0.5 | 0 | |
Corner cut distance | 1.5 |
Callipers | / | / | / | / | / | |
Profile terminal distance | 1.5 |
Callipers | / | / | / | / | / | |
Profile stadia | 1.0 |
Callipers | / | / | / | / | / | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.40 | +0.42 | +0.42 | +0.40 | +0.44 | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.26 | 0.16 | 0.12 | 0.20 | 0.10 | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | 0 | 0 | |
Roundness of the hole | 1.2 |
Callipers | 0.06 | 0.10 | 0.08 | 0.06 | 0.12 | |
Adjacent two holes distance in same group | 0.5 |
Callipers | +0.18 | +0.24 | +0.20 | +0.24 | +0.20 | |
Random two holes distance in same group | 1.0 |
Callipers | +0.36 | +0.40 | +0.44 | / | / | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.42 | +0.48 | +0.46 | +0.40 | / | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | +0.52 | +0.52 | +0.54 | / | / | |
Bending point displacement | 2.0 | Steel measure tap | 1.5 | / | 1.0 | 1.0 | 2.0 | |
Root clean | t10 | +0.8 -0.4 |
Callipers | / | / | / | / | / |
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified | Qualified | Qualified | Qualified | Qualified |
Inspect
Profile & Plate
Project230KV230kV Bolivia Tower
Type2HD KH08-01
Description |
Allowable Deviation (mm) |
Inspect Method |
| |||||
121 | 305 | 34 |
|
| ||||
-6 | -6 | -5 | / | / | ||||
/ Profile width / thickness | GB/T706 Confirm GB/T706 |
Callipers | / | / | / | / | / | |
Plate thickness | GB/T 709 Confirm GB/T 709 |
Callipers | +0.28 | +0.24 | -0.42 | / | / | |
LB Length or width | 2.0 |
Steel measure tap | +1.0 | +2.0 | +1.0 | / | / | |
Profile verticality | 3b/1003.0 3b/100 and 3.0 | Ruler | / | / | / | / | / | |
Cross section verticality | +t/83.0 +t/8 and 3.0 |
Ruler | 0.5 | 0.5 | 0 | / | / | |
Corner cut distance | 1.5 |
Callipers | / | / | / | / | / | |
Profile terminal distance | 1.5 |
Callipers | / | / | / | / | / | |
Profile stadia | 1.0 |
Callipers | / | / | / | / | / | |
Diameter of hole | Black parts+0.80 Galvanized parts+0.5-0.3 |
Callipers | +0.42 | +0.48 | +0.40 | / | / | |
Diameter difference of top and bottom holes | 0.12 t |
Callipers | 0.16 | 0.10 | 0.12 | / | / | |
Center line of holes verticality | 0.03t2.0 0.03t and 2.0 |
Straight steel ruler | 0 | 0 | 0 | / | / | |
Roundness of the hole | 1.2 |
Callipers | 0.18 | 0 | 0.12 | / | / | |
Adjacent two holes distance in same group | 0.5 |
Callipers | +0.20 | +0.20 | +0.22 | / | / | |
Random two holes distance in same group | 1.0 |
Callipers | / | / | / | / | / | |
Adjacent two groups of holes distance | 1.0 |
Callipers | +0.36 | +0.46 | +0.42 | / | / | |
Random two groups of holes distance | 1.5 | / Steel measure tap/ Callipers | / | / | / | / | / | |
Bending point displacement | 2.0 | Steel measure tap | / | / | / | / | / | |
Root clean | t10 | +0.8 -0.4 |
Callipers | / | / | / | / | / |
10t16 | +1.2 -0.4 | |||||||
T16 | +2.0 -0.6 | |||||||
Semi-diameter of profile back off arc | +2.0 0 |
Callipers | / | / | / | / | / | |
Bevelling | Open angle: a5 Truncated edge: c: 1.0 |
Callipers | / | / | / | / | / | |
Conclusion | Qualified | Qualified | Qualified | / | / |
Inspect