Technical News

February 9, 2024

Communication tower foundation selection and design

0 Introduction The communication tower is a tall structure equipped with communication antennas. It is characterized by a tall structure and a relatively small cross-section. The […]
February 9, 2024

Communication Steel Tower Design and Production Process

Communication steel towers play a crucial role in the telecommunications industry, providing the necessary infrastructure for the transmission of signals and data. These towers are designed […]
July 23, 2023

How do engineers determine the optimal height, design, and material for transmission towers?

Determining the optimal height, design, and material for transmission towers involves numerous factors, relying heavily on engineering principles, safety regulations, and environmental considerations. Here’s a brief overview of […]
July 23, 2023

What Is The Science Behind Electric Transmission Lines Tower?

Electric transmission lines are a crucial part of the electrical power grid, carrying electricity from power plants to substations before it goes to homes, businesses, and […]
June 29, 2023

What are different types of towers used in power transmission system?

Transmission towers are structures that support overhead power lines, also known as transmission lines, used to transmit electrical energy over long distances. There are several types of transmission […]
February 15, 2019

monopole communication tower VS microwave towers

Tubular Steel Pole structures and free standing lattice towers made of angle sections are generally used in tele-communication industry. In urban areas with high density of […]
January 15, 2019

Analysis of guyed steel lattice mast subjected to environmental loads

Analysis of guyed steel lattice mast subjected to environmental loads Steel lattice masts rank among the most efficient load-bearing structures in the field of high-rise construction. […]
January 12, 2019

four legged angle iron /tube communication towers

Project Overview The aim of the project is to Design, supply, 120m high self-supporting four legged steel lattice communication tower including inner ladders, cable trays, inner […]
January 10, 2019

general information about guyed lattice mast,guyed lattice towers and masts

A lattice aluminium guyed mast system, designed for ultimate flexibility in design, manufacture and installation. The system comprises high quality extrusions in high grade 6082 TF […]
January 5, 2019

necessary parts of Radio masts and towers,communication towers

Steel Work The steel used in the fabrication of the tower shall comply with BS, JIS or an equivalentstandard proposed by TowerSupplier and agreed by “*****”. […]
December 27, 2018


Standard: ANSI/TIA-222-H-1 -2018 Design Wind Speed: V = 160 km/hr. (3 Sec Gust) Operational Wind Speed: V = 160 km/hr. (3 Sec Gust) Maximum Tilt & […]
November 27, 2018

guyed tower VS free-standing tower

 Free Standing Tower. These towers are made to EIA/TIA specifications. The towers are fully hot dipped galvanized after fabrication to assure best corrosion protection available. All […]