
Self-supporting 3-leg triangular lattice angle steel telecom towers (5m–200m) fabricated from Q355B, Q420B, Q235B, ASTM A36, ASTM A572 Gr50, and EN 10025 structural steels with hot-dip galvanizing per ASTM A123 / ISO 1461 and structural design per ANSI/TIA-222-G/H, GB 50017, and EN 1993-3-1.
TABLE 1 // MASTER SPECIFICATION
Self-supporting three-legged angle steel communication towers engineered for 5G/4G/3G/2G BTS sites, narrow-base urban plots, and high-wind telecom corridors.
| Specification Item | Standard / Range Value | Engineering & Compliance Note |
|---|---|---|
| Model & Structure | 3 Legs Angle Tower (Triangular Self-Supporting Lattice) | 3 main supporting legs with angle bracing; narrow-base option |
| Origin & Manufacturing Base | jielian, Hebei, China (“Tower Capital of China”) | 60,000 t/yr capacity (5,000 t/mo); CNC lines + HDG plant |
| Tower Height Range | 5 m – 200 m (Standard: 20m, 25m, 30m, 35m, 40m, 45m, 50m, 55m, 60m, 65m, 70m) | Custom heights engineered per wind, ice, and antenna load |
| Primary Steel Materials | Q355B / Q420B / Q235B; ASTM A36 / A572 Gr50; S275JR / S355JR; 35# Steel (masts) | Sourced from HBIS, Baowu, and Shougang steel mills |
| Design Standards | ANSI/TIA-222-G / TIA-222-G-2005 / TIA-222-H; GB 50017; YD/T 5131; EN 1993-3-1 | Free foundation design & MS TOWER calculation report |
| Design Wind Speed & Pressure | 120–180 km/h (Customizable up to 250 km/h; 28–60 m/s; 0.4–1.2 kN/m²) | Allowable twist/deflection: 0.5° – 1.0° at operating wind |
| Seismic & Ice Load Rating | Seismic Intensity: Grade 8 (GB 50011) | Ice Thickness: 5 – 20 mm | Operating temperature: -50°C to +70°C (-40°C to +70°C) |
| Anti-Corrosion & Coating Thickness | Hot-Dip Galvanized per ASTM A123 / ISO 1461; Min 86 μm / 100 μm (85–120 μm) | 30–50+ years service life; verticality deviation ≤ 1/1000; ground ≤ 4Ω |
| Certifications & Packaging | ISO 9001:2008 / ISO 9001:2015; SGS COC | Bundled with galvanized steel strapping | Sold by single item / complete tower kit; 10×10×10 cm reference block |
TABLE 2 // CHEMICAL ANALYSIS
Controlled carbon, manganese, phosphorus, sulfur, and micro-alloying elements across GB/T, ASTM, and EN angle steel grades ensure weldability, cold-weather impact toughness, and hot-dip galvanizing reactivity (Sandelin range control).
| Steel Grade | Standard / UNS | C (%) | Si (%) | Mn (%) | P (%) | S (%) | Micro-Alloy / Notes |
|---|---|---|---|---|---|---|---|
| Q235B | GB/T 700 | ≤ 0.17 | ≤ 0.35 | 0.35 – 0.80 | ≤ 0.045 | ≤ 0.045 | Rimmed / Semi-killed carbon steel |
| Q235C / Q235D | GB/T 700 | ≤ 0.17 | ≤ 0.35 | 0.35 – 0.80 | ≤ 0.040 / 0.035 | ≤ 0.040 / 0.035 | Killed steel for low-temp impact |
| Q355B | GB/T 1591 | ≤ 0.20 | ≤ 0.50 | ≤ 1.70 | ≤ 0.035 | ≤ 0.035 | V, Nb, Ti grain refinement |
| Q355C / Q355D | GB/T 1591 | ≤ 0.18 | ≤ 0.50 | ≤ 1.70 | ≤ 0.030 / 0.025 | ≤ 0.030 / 0.025 | 0°C and -20°C Charpy V-notch verified |
| Q420B | GB/T 1591 | ≤ 0.20 | ≤ 0.50 | ≤ 1.70 | ≤ 0.030 | ≤ 0.030 | High-strength main legs (100m–200m) |
| ASTM A36 | ASTM A36 / K02600 | ≤ 0.26 | ≤ 0.40 | 0.80 – 1.20 (≥20mm) | ≤ 0.040 | ≤ 0.050 | Cu ≥ 0.20% optional |
| ASTM A572 Gr50 | ASTM A572 / K12300 | ≤ 0.23 | ≤ 0.40 | ≤ 1.35 | ≤ 0.040 | ≤ 0.050 | Cb/Nb, V, or N micro-alloyed |
| S275JR / S355JR | EN 10025-2 | ≤ 0.21 / ≤ 0.24 | ≤ 0.55 | ≤ 1.50 / ≤ 1.60 | ≤ 0.035 | ≤ 0.035 | CEV ≤ 0.40–0.47% |
TABLE 3 // MECHANICAL PROPERTIES
| Grade / Class | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) | Charpy KV Impact | Typical Tower Role |
|---|---|---|---|---|---|
| Q235B (S235JR) | ≥ 235 (t ≤ 16mm) | 375 – 500 (360–510) | ≥ 24% – 26% | 27 J @ +20°C | Secondary bracing & platforms |
| Q235C (S235J0) | ≥ 235 (t ≤ 16mm) | 375 – 500 | ≥ 24% – 26% | 27 J @ 0°C | Sub-zero bracing members |
| Q235D (S235J2) | ≥ 235 (t ≤ 16mm) | 375 – 500 | ≥ 24% – 26% | 27 J @ -20°C | Cold-region lattice bracing |
| Q355B (S355JR / A572 Gr50) | ≥ 355 (t ≤ 16mm) | 470 – 630 | ≥ 20% – 21% | 27 J @ +20°C (34 J @ +20°C) | Primary 3-leg chords & 5G BTS legs |
| Q355C (S355J0) | ≥ 355 (t ≤ 16mm) | 470 – 630 | ≥ 20% – 21% | 27 J @ 0°C | High-load cold-climate legs |
| Q355D (S355J2) | ≥ 355 (t ≤ 16mm) | 470 – 630 | ≥ 20% – 21% | 27 J @ -20°C | Severe winter & high-altitude legs |
| Q420B | ≥ 420 (t ≤ 16mm) | 520 – 680 | ≥ 19% | 34 J @ +20°C | Tall 80m–200m & heavy typhoon legs |
TABLE 4 // SUB-ASSEMBLIES
| Assembly Component | Structural Role & Geometry | Material & Finish | Load & Safety Function |
|---|---|---|---|
| 3-Legged Tower Body | Core triangular space-frame structure with 3 steel legs linked by angle web members. | Q355B/Q420B/Q235B HDG angle steel | Resists vertical antenna/equipment gravity loads plus lateral wind, ice, and seismic forces. |
| Tower Legs & Base Footing | Bottom leg terminations with gusset/base plates and anchor bolts fixed to concrete foundation. | High-strength HDG steel + Grade 8.8 bolts | Transfers overturning moment, shear, tension, and compression into ground per site geology. |
| Climbing Ladder System | Continuous vertical access ladder with rungs, safety cage/handrails, and fall-arrest rail. | HDG structural steel (ISO 1461) | Provides safe technician ascent/descent for 5G RRU/antenna installation and maintenance. |
| RF & Power Cable Tray | Internal or external ladder-style tray running from base to antenna platforms (2–5 levels). | HDG steel with clamps & brackets | Routes and protects coaxial/fiber RF feeders and DC power cables from tangling and weather. |
TABLE 5 // 5G BTS DEPLOYMENT
Standard modular configurations for multi-operator 2G/3G/4G/5G base transceiver stations (BTS), supporting 2–5 antenna platform tiers with 6–12 antennas per level.
| Tower Height | Typical Base Span | Platform Levels | Antenna Capacity | Approx. Steel Mass | Primary 5G / Telecom Site Use |
|---|---|---|---|---|---|
| 20 m | 1.8 – 2.6 m | 2 Tiers | 6 – 12 Antennas/tier | 1.8 – 2.6 t | Dense urban 5G micro/macro infill |
| 25 m | 2.2 – 3.1 m | 2 – 3 Tiers | 6 – 12 Antennas/tier | 2.5 – 3.6 t | Suburban 4G/5G co-location site |
| 30 m | 2.6 – 3.7 m | 3 Tiers | 6 – 12 Antennas/tier | 3.4 – 4.9 t | Standard regional macro telecom tower |
| 35 m | 3.0 – 4.3 m | 3 Tiers | 6 – 12 Antennas/tier | 4.5 – 6.4 t | Highway & industrial park 5G coverage |
| 45 m | 3.8 – 5.4 m | 3 – 4 Tiers | 6 – 12 Antennas/tier | 7.2 – 10.2 t | Multi-operator rural/corridor BTS |
| 50 m | 4.2 – 6.0 m | 4 Tiers | 6 – 12 Antennas/tier | 8.9 – 12.6 t | Wide-area cellular & microwave link |
| 55 m | 4.6 – 6.6 m | 4 Tiers | 6 – 12 Antennas/tier | 10.8 – 15.2 t | High-elevation 5G & private LTE |
| 60 m | 5.0 – 7.2 m | 4 – 5 Tiers | 6 – 12 Antennas/tier | 13.0 – 18.4 t | Regional backbone & emergency comms |
| 65 m | 5.4 – 7.8 m | 5 Tiers | 6 – 12 Antennas/tier | 15.6 – 22.0 t | Heavy multi-carrier 5G macro tower |
TABLE 6A
| Fastener / Weld Item | Applicable Standard / Grade |
|---|---|
| Bolt Strength Grades | Grade 4.8, Grade 6.8, Grade 8.8 (high-strength tower connections) |
| Mechanical Property Standards | Bolts: ISO 898-1 | Nuts: ISO 898-2 | Washers: ISO 6507-1 |
| Bolt Dimensional Standards | DIN 7990, DIN 931, DIN 933 |
| Nut & Washer Dimensions | Nuts: ISO 4032, ISO 4034 | Washers: DIN 7989, DIN 127B, ISO 7091 |
| Welding Processes | CO₂ Gas-Shielded Arc Welding & Submerged Arc Welding (SAW) |
| Welding Quality Standards | AWS D1.1 / GB 50205 |
TABLE 6B
| Test / Coating Parameter | Method, Standard & Acceptance Criteria |
|---|---|
| Steel Profiles Galvanizing | ASTM A123 or ISO 1461; Min 86 μm / 100 μm (85–120 μm range) |
| Bolts & Nuts Galvanizing | ISO 1461 or ASTM A153 |
| Coating Thickness Test | Magnetic gauge per ASTM A123 / ISO 1461 (85–120 μm min) |
| Adhesion & Visual Check | Bend, hammer, and knife tests; zero bare spots, cracks, pits, blisters, or runs |
| Salt Spray & Field Check | ASTM B117 neutral salt spray (100–500h) + post-transport spot check |
TABLE 7 // PORTFOLIO COMPARISON
| Structure Category | Specific Tower / Mast Types | Material & Finish | Height & Wind Rating | Ideal Application |
|---|---|---|---|---|
| 3-Legged Angle Tower | 3-Leg Triangular Self-Supporting Lattice (Narrow & Standard Base) | Q355B / Q420B / Q235B; HDG | 5 – 200 m | Up to 180–250 km/h | 5G/4G/3G/2G BTS & multi-carrier sites |
| 4-Leg & Tubular Towers | 4-Leg Angle Tower, 3-Tube Tower, 4-Tube Steel Tower | Q235B / Q355B / Q420; HDG | 20 – 120+ m | 28–60 m/s | Heavy wind/ice or compact footprints |
| Monopole Towers | Tapered Monopole Tower, Street Pole Mast | Q355B / Q420B; HDG | 15 – 60 m | Up to 150+ km/h | Urban streetscapes & small plots |
| Special & Guyed Masts | Camouflage (Pine Tree) Tower, Guyed Mast, Radar & Met Tower | HDG Steel + Foliage / Paint | 15 – 100 m | Up to 130+ km/h | Scenic areas, radar, weather, comms |
| Telescopic Masts | TAL-M6-1.9-30 Manual Winch Crank Lock Push-Up Pole | 35# Steel; Paint / HDG | 6 – 20 m (1.9m closed) | 130 km/h | Portable lighting, 30kg payload masts |
TABLE 8 // MODEL COMPARISON
| Model Code | Structure Type | Materials | Extended / Total Height | Closed Height | Max Wind / Payload | Surface / Temp / Color |
|---|---|---|---|---|---|---|
| 3 Legs Angle Tower | 3-Leg Triangular Self-Supporting Unit Angle Lattice | Q235B / Q355B / Q420B; A36 / A572 Gr50 | 5 – 200 m | Modular bolted sections | 120–250 km/h | Multi-antenna | HDG (ISO 1461/A123); -50°C to +70°C; Silver/Custom |
| TAL-M6-1.9-30 | Portable Manual Winch Crank Lock Push-Up Telescopic Mast | 35# Steel | 6 m (range 6–20 m) | 1.9 m | 130 km/h | 30 kg payload | Painted / HDG; -50°C to +70°C; Bronze/Custom |
| XYTCGT-1 | Telecom / Antenna Lattice Tower Variant | 35# Steel & Angle Q235B/Q345B/Q420 | Up to 200 m | Modular bolted sections | 120 km/h | Telecom/Antenna | HDG (ASTM A123/ISO 1461); -50°C to +70°C; Custom |
TABLE 9 // ACCESSORIES
| Accessory System | Included Hardware | Engineering & Compliance Target |
|---|---|---|
| Lightning Protection System | Air terminal lightning rod, copper/HDG down conductors, ground ring/rods | Grounding resistance ≤ 4 Ω; surge dissipation |
| Aviation Obstruction Lights | Low/medium-intensity LED beacons, photocell controller, junction box | ICAO / FAA obstacle visibility on tall towers |
| Antenna Mounts & Platforms | 2–5 platform tiers (6–12 antennas/tier), sector frames, RRU & microwave mounts | Supports multi-carrier 5G/4G/3G/2G arrays |
| Safe Climbing & Cable System | Safety ladder, fall arrest rail, rest platforms, internal/external cable tray | Rapid bolted field erection & safe maintenance |
TABLE 10 // GLOBAL EQUIVALENTS
| Strength Tier | China (GB/T) | USA (ASTM) | Europe (EN 10025) | Primary Application |
|---|---|---|---|---|
| Mild Carbon (~235–275 MPa) | Q235B / Q235C / Q235D | ASTM A36 | S235JR / S235J0 / S235J2; S275JR | Bracing, ladders, light brackets |
| HSLA (~345–355 MPa) | Q355B / Q355C / Q355D (Q345B) | ASTM A572 Gr50 | S355JR / S355J0 / S355J2 | Primary 3-leg chords & 5G BTS towers |
| High-Strength (~420 MPa) | Q420B | ASTM A572 Gr60 / Gr65 (equiv.) | S420N / S460N (equiv.) | Tall 80m–200m & extreme wind towers |
TABLE 11 // WIND & DEFLECTION
| Wind Class / Duty | Wind Speed (km/h) | Wind Velocity (m/s) | Wind Pressure (kN/m²) | Allowable Deflection / Tilt |
|---|---|---|---|---|
| Standard Telecom Duty | 120 km/h | ~33.3 m/s (28–35 m/s) | 0.40 – 0.65 kN/m² | 0.5° – 1.0° @ service wind |
| Heavy / Coastal Duty | 150 – 180 km/h | 41.7 – 50.0 m/s | 0.75 – 1.00 kN/m² | 0.5° – 1.0°; verticality ≤ 1/1000 |
| Extreme Typhoon / Custom | Up to 250 km/h | Up to 60 m/s (69.4 m/s) | Up to 1.20+ kN/m² | Per ANSI/TIA-222-G/H & GB 50017 |
TABLE 12 // LOGISTICS & ERECTION
| Stage | Process & Specification | Quality / Delivery Outcome |
|---|---|---|
| 1. Structural Calculation | MS TOWER structural analysis + foundation design per TIA-222-G/H or GB 50017 | Complimentary calculation & foundation drawings |
| 2. CNC & Trial Pre-Assembly | Automated CNC punching/cutting + factory pre-assembly verification | 100% member fit & bolt-hole alignment |
| 3. Hot-Dip Galvanizing | ASTM A123 / ISO 1461 coating (min 86–100 μm) + ASTM B117 & gauge check | 30–50+ year corrosion protection |
| 4. Bundled Packaging | Bundled with galvanized steel strapping; labeled by member mark | Container/truck-ready export & domestic logistics |
| 5. Bolted Site Erection | Modular bolted assembly with Grade 8.8 HDG bolts, ladder & cable tray | Rapid installation & short project lead time |
TABLE 13 // KEY HIGHLIGHTS
| Highlight | Technical & Commercial Summary |
|---|---|
| 1. Premium Steel | Q355B/Q420B/Q235B/A36/A572 Gr50/S275JR tested for tensile & low-temp impact |
| 2. Heavy Galvanizing | ASTM A123 / ISO 1461 HDG (min 86–100 μm) for 30–50+ years corrosion resistance |
| 3. Precision & CAD | Factory pre-assembly + free MS TOWER structural report & foundation design |
| 4. 5G/4G Ready | Multi-carrier antenna capacity (2–5 tiers) + integrated RF/power cable tray |
| 5. Fast Erection | Modular bolted design with Grade 8.8 HDG bolts speeds up site installation |
| 6. Factory Direct | jielian, Hebei plant (60,000 t/yr) with direct pricing & global logistics |
TABLE 14 // CUSTOM ORDER SPECS
| Input Parameter | Customizable Range / Option | Impact on Tower Design |
|---|---|---|
| Tower Height | 5 m – 200 m | Sets section count, leg profile, and base span |
| Design Wind Speed | 120 – 250 km/h (28–60 m/s) | Governs lateral wind drag & deflection limit |
| Seismic & Ice Load | Seismic Grade 8; Ice 5–20 mm | Adjusts dynamic inertia & iced member area |
| Antenna & Platform Load | 2–5 tiers; 6–12 antennas/tier; RF/MW | Sizes top/platform members & cable tray |
Three-legged angle steel communication towers (5m–200m) in Q355B/Q420B/Q235B/A36/A572 Gr50/S275JR with ASTM A123 / ISO 1461 hot-dip galvanizing (min 86–100 μm), ANSI/TIA-222-G/H and GB 50017 structural compliance, factory pre-assembly, and 30–50+ year service life for global 5G/4G BTS networks.