Electric Transmission Line Tower
October 29, 2018
The High Voltage Electric Power Transmission Line Towers have to pre-assembled before and after hot dip galvanized, to ensure all the details are finished as […]
December 19, 2018
1 disposiciones constructivas 1.1 Materiales Los materiales que se utilizarán en la fabricación de las estructuras metálicas de los patios de llaves serán perfiles angulares de […]
January 22, 2018
Specification of angel electric transmission line tower Design 1. Voltage grade under 500KV Structure Steel High Tensile Steel Mild Steel 2. Grade GB1591: Q345B, Q345C,Q3455D GB700: Q235B, […]
December 10, 2018
electric-power transmission lines carry power from generating plants (see electric-power generation) to the distribution systems that feed electricity to domestic, commercial and industrial users. Transmission lines […]
April 27, 2018
Transmission structures are one of the most visible elements of the electric transmission system. They support the conductors used to transport electric power from generation sources […]
June 27, 2018
Transmission tower lines and distribution tower lines are the two types tower for the transportation of electricity. Transmission tower lines is a pair of electrical conductors […]
April 7, 2017
Why should the transmission line use Double Circuit Tower? 1. Conceptually: Single circuit refers to a load has a power supply circuit; A double loop is […]
June 27, 2018
Electric power transmission is the bulk movement of electrical energy from a generating site, such as a power plant, to an electrical substation. The interconnected lines […]
January 19, 2018
Electrical transmission tower is the main supporting unite of overhead Transmission line. It carry the heavy transmission conductor at a sufficient safe height from ground. It […]
October 24, 2018
Galvanized Lattice Angle Steel Power Transmission Line Tower Name 500KV Hot dipped galvanized transmission line Material Q235 or Q345 Voltage Grade 10KV, 110KV, 220KV, 500KV or […]
December 27, 2018
Material Specification Technical Specification for Towers tower all parts (Legs, crossarms, joints) shall be made of rolled steel with minimal shearing strength not less than 42 […]
April 23, 2018
Lattice towers have been around the block for decades, though there has been a huge spotlight on them in recent years. While high demand in Africa […]