Technical Specifications

April 6, 2018
transmission line Galvanized steel lattice tower

132KV-Übertragungsleitung aus verzinktem Stahlgitterturm Detaillierung und Estimation

Shop Detailing and Estimation Before leaving the Manufacturer’s Works all tower members shall be hard stamped with distinguishing numbers and/or letters corresponding to distinguishing numbers and/or [...]
April 2, 2018
1000kv and under electric angle electric pole transmission line steel tower,electric power transmission line steel tower

132kv,230kv,380kv,400kv Transmission Line Steel Tower Lastannahmen

B1.5.1 Design Loads Applied basic wind pressures shall be in accordance with those specified in B2.5.8 above. Das Design beruht auf den folgenden Überlegungen basieren:- [...]
März 22, 2018
Power-transmission-lines Manufacturing company

230 kV-Übertragungsleitung Turm Technische Daten : Teil eins

INTRODUCTION The works covered by these Technical Specifications form part of the Interconnection System Reinforcement Project. Dieser Teil des Projektes besteht aus dem Design, Herstellung, [...]
März 31, 2018
Power Line Towers - Design of Transmission Towers

400KV Lattice Steel Tower Design-Anforderungen und Design-Span für Support-Standorte ,Elektrische Transmission Line Stahl

B1.5.1 Design Requirements The unit stresses in members and connections for the structural design calculation, basierend auf der Lastannahme und Design unausgeglichene Belastung (broken wire [...]
Dezember 8, 2018

Überlegungen zur Analyse und Gestaltung von communiation Stahlturm

Design Considerations Modern codes and standards require that a transmitting tower be designed to resist dead and live wind and earthquake loads. Ladungen, forces, and stresses that result from temperature changes, movements due to differential settlements, or any combination of these should also be considered. Older towers should be carefully checked to assure that no significant changes in design criteria have been required, since their original design and erection, that would increase the possibility of failure. Dead and Live Loads Dead loads consist of the weights of the members of a tower and any equipment that is permanently attached to it, including any attached signs. AM transmitting towers support only their lighting equipment. The FM transmitting tower supports its transmission line, Antenne, and lighting equipment. The microwave tower must support microwave dishes, Reflektoren, and lighting equipment. Das [...]
Mai 18, 2018
Manufacturer Lattice Tower Tubular Tower

Kommunikation Gitterturm ,Fertigung Montage

Was ist die Kommunikation Gitterturm? Communication Tower Product Description: Kommunikations-Turm ist eine Art von Signalübertragung Turm, also called signal transmission tower or signal [...]
Mai 18, 2018
steel communication tower

Kommunikation GSM Gitterturm Design | 4 legged GSM Selbsttragende Stahlturm

Turmstruktur Design-Specs 5.1 Antenne Loading 5.1.1 Platz GSM Selbsttragende Stahlturm mit einer Höhe 20 m und höher: ein. Installation von 9 numbers of GSM [...]
Mai 10, 2018

Vergleich von 3-Beinrohrturm oder 4-Fuß-Winkel Turm?

Rohrturm, also named tubular tower, alle Rahmen gemacht werden Rohr, andere Teile sind Rohr oder Winkelstahl, durch angeflanscht, Bolzen, Muttern und Unterlegscheiben. [...]
April 17, 2018
transmission line steel tower

Korrosion und zum Schutz der Übertragung Stahlkonstruktion Turm

Abstrakt: Mit der kontinuierlichen Verbesserung der sozialen und wirtschaftlichen Entwicklung Ebene, Chinas Stromnetz Bau hat auch ständig weiterentwickelt und vorgeschoben worden ist. Transmission towers are an [...]
Februar 2, 2019

Design von Winkel / Tension Type Doppelschaltturm für 110kV Transmission Line

TYPES OF TOWERS Classification according to number of circuits: Single Circuit towers Double Circuit towers Multi – Circuit towers Classification according to use: Tangent / Federung Turm [...]
April 10, 2018
galvanized Electric power 220kv transmission line Angle Tower Manufacturing Workshop

Elektrische Transmission Line verzinktem Stahlgitterturm Zubehör

Electrical Tower Accessories a) General Each tower shall be provided with the necessary pull-off plates, U-bolts, Dehntrafos, usw., at all conductor and shield wires attachment [...]
März 26, 2018
Galvanizing steel tower

Verzinken Voraussetzungen , 230 kV-Übertragungsleitung Turm, Zweiter Teil

Transmission line Steel Tower Galvanizing Requirements Except where specified to the contrary, all iron and steel used in the construction of the Contract Works shall be [...]