Transmission Steel Pole

March 22, 2019

Single Circuit Angle Steel Power Transmission Line Tower

Steel type: angle steel or tubular steel Materials: Q235, Q345 (A36, A572 Gr.50) or others Height: 10-100m Voltage: 10kV-1,000kV Appearance: hot-dip galvanized Shape (round): face/polygonal face […]
March 3, 2019

Transmission structures,Transmission tower

Transmission structures are one of the most visible elements of the electric transmission system. They support the conductors used to transport electric power from generation sources […]
February 8, 2019

Design Examples Power Transmission Towers

The geometry of tower which is analyzed and design shown in Figure 2 has the base width of tower 7 × 7 m and the height […]
February 5, 2019

Comparison of Various Bracing System for Self-Supporting Steel Lattice Structure Towers

The expansion of the telecommunication systems, as well as the natural requirements for increasing the electrical power transmission systems in the world were the main reasons […]
December 1, 2018

Steel Pole,Telescopic Pole,Steel Transmission Pole

The Steel Pole as specified in this Section shall conform to the latest edition of the following standards for operation in overhead lines in air under […]
June 27, 2018

differences between Transmission tower lines and distribution tower lines

Transmission tower lines and distribution tower lines  are the two types tower for the transportation of electricity. Transmission tower lines is a pair of electrical conductors […]
April 25, 2018

Monopole Tower for Telecommunication Scope of Work

Monopoles are an ideal solution where space is a premium and aesthetics are a must. A simple, sleek design, Rohn’s pre-engineered monopoles, exclusively available through Jielian, […]
April 11, 2018

Transmission Line Galvanized Steel Tubular Pole 10KV to 500KV

Keeping in mind the diverse requirements of the clients, we offer a wide range of Tubular Steel Pole that is used for installation of lights on […]
April 11, 2018

Galvanized Steel Electrical Power Pole for Transmission Line – HDG Polygonal Shape

Why Use Steel pole for  Transmission Line? Steel poles can provide advantages for high-voltage lines, where taller poles are required for enhanced clearances and longer span […]